两个dpa类配体的铜(Ⅱ)配合物的合成、结构、核酸酶活性及细胞毒性

以dpa衍生配体合成2个单核铜配合物[CuL（NO₃）₂]（1）和[CuL（OAc）（H₂O）]ClO₄（2）,并对其进行了表征。单晶结构显示,配合物1中的Cu中心可以描述为畸变的五角双锥构型,而2的Cu中心为畸变的八面体构型。运用电子吸收和发射光谱法研究了配合物与CT-DNA的键合作用,结果表明2个配合物与DNA的相互作用均为部分插入模式。通过改变浓度、时间进一步检测配合物切割DNA的能力,以及验证其切割机理,结果表明在外界诱导剂存在下,2个配合物均表现出强的切割DNA的能力,其作用机理为氧化切割机理,其中活性氧可能为·OH和1O2。利用MTT法测定了配合物对体外HeLa、HepG-2和SGC-7901肿瘤细胞增殖的抑制能力。     

Block Copolymer Supported Gold Nanoparticles Assemblies with Exposed Gold Surface

Polymer-involved nanoparticles or nanoparticle assemblies are now facing a crossroad, where the exposure of nanoparticle and multiple nanoparticles cannot be obtained at the same time. Therefore, a new series of nanoparticle clusters is synthesized, where multiple gold nanoparticles assemble with amphiphilic block copolymers supporting inside. The exposure of gold nanoparticles of the structure is confirmed and increases the reduction rate of 4-nitrophenol by 60%. The assemblies can also be used as surface enhanced Raman scattering(SERS) probes with an enhancement factor(EF) as high as 3×10³.     

多金属氧酸盐材料在二氧化碳电催化还原领域中的研究进展

随着工业发展和全球人口的持续增长,人类对化石燃料的消耗日益增加,从而导致大气中二氧化碳含量的显著增加以及与之相伴的一系列环境问题.电化学还原二氧化碳制备高附加值的燃料和化学品具有稳定的效率和较高的经济可行性等特点,目前已成为一种有前景的策略来缓解当前全球面临的能源短缺和气候变暖问题.然而,电催化二氧化碳还原过程存在反应能垒高和复杂的多电子/质子耦合过程等不足,因此,合理有效的电催化剂设计成为该领域的关键问题.近年,理解和明确电化学二氧化碳还原反应过程的活性起源、选择性调控机制和催化反应机理已成为高效电催化剂设计过程中的重要指导原则.作为一类独特的纳米尺度的金属氧簇,多金属氧酸盐(多酸)已成为二氧化碳还原领域的热点材料.尤其是,多酸明确的结构、优越的电子/质子存储转移能力和二氧化碳吸附活化能力有助于探究二氧化碳还原反应过程中的活性起源和构效机制.因此,利用多酸阐明电化学二氧化碳还原反应中的这些关键问题对于开发高效、可实用化的电催化剂意义重大.本文综述了近年多酸在电催化二氧化碳还原反应中取得的进展,重点介绍了多酸阴离子均相分子催化剂、多酸基无机-有机杂化材料催化剂、多酸电解质溶液、多酸-纳米复合材料在电催化二氧化碳还原反应中的应用.利用密度泛函理论结合原位实验证据推测了可能的反应机理,探讨了多酸对电催化活性和产物选择性的影响,揭示了电子/质子存储-转移过程和多酸表面修饰工程在电催化二氧化碳还原过程中的重要作用.最后,本文还分析了多酸基材料存在的问题与面临的挑战,并对多酸基材料在二氧化碳还原领域的未来发展进行了展望,这对理解电催化二氧化碳还原反应中的关键步骤和开发新型高效的电催化二氧化碳还原电催化剂具有启发意义.     

A Conjugated Copolymer Bearing Imidazolium-based Ionic Liquid:Electrochemical Synthesis and Electrochromic Properties

An imidazolium-based ionic liquid(IL) modified triphenylamine derivative,namely 1-(4-((4-(diphenylamino)benzoyl) oxy)butyl)-3-methyl imidazole tetrafluoroborate(TPAC_6 IL-BF_4),was designed and synthesized,and further applied with 3,4-ethylene dioxythiophene(EDOT)to prepare conjugated copolymer P(EDOT:TPAC_6 IL-BF_4) via electrochemical polymerization.The cyclic voltammetry curves show that the copolymer P(EDOT:TPAC_6 IL-BF_4) possesses two pairs of redox peaks,which should be ascribed to the redox behaviors of EDOT and triphenylamine.The ultraviolet-visible(UV-Vis) absorption spectrum of P(EDOT:TPAC_6 IL-BF_4) exhibits one maximum absorption peak at 580 nm and a small shoulder characteristic peak at 385 nm under neutral state which are assigned to π-π~* conjugated structure of EDOT and triphenylamine.After being applied at the positive voltage,the copolymer color changes from dark blue to light blue,which is close to the color of poly(3,4-ethylenedioxythiophene)(PEDOT).Surprisingly,the copolymer P(EDOT:TPAC_6 IL-BF_4) shows shorter switching time of 0.37 s,0.30 s at 580 nm and 0.38 s,0.45 s at 1100 nm compared with PEDOT.It is more intriguing that the copolymer P(EDOT:TPAC_6 IL-BF_4) exhibits electrochromism even in free supporting electrolyte.The results confirm that the existence of imidazolium-based ionic liquid has an improvement on the ion diffusion properties and the switching time of conjugated polymer,which may provide a potential direction for the preparation of high-performance electrochromic materials.     

基于二苯甲酰酒石酸构筑的钴（Ⅱ）、镍（Ⅱ）配合物的合成、结构、荧光及磁性质

在室温条件下合成了2个配合物[Ni（DBTA）（DMF）（H₂O）₄]（1）和[Co（DBTA）（DMF）（H₂O）₄]（2）（D-H₂DBTA=D-（+）-二苯甲酰酒石酸,DMF=N,N-二甲基甲酰胺）,并通过元素分析、FT-IR光谱、X射线单晶及粉末衍射表征了2个配合物的结构。X射线单晶衍射结果表明,2个配合物同构,属于单斜晶系,P2₁空间群。配合物由配位键形成零维结构,再通过分子间氢键形成三维网状结构。荧光分析表明当激发波长为280 nm时,配合物1和2具有较强的荧光。尽管2个配合物同构,但表现出不同的磁性质：配合物1主要表现出Ni²⁺离子间弱的反铁磁相互作用,而配合物2则表现为Co²⁺离子的磁各向异性以及Co²⁺离子间强的反铁磁相互作用。     

纳米薄层HZSM-5分子筛催化甲醇制丙烯

在合成系列硅铝比纳米薄层HZSM-5分子筛的基础上,研究了纳米薄层HZSM-5分子筛催化甲醇制丙烯(MTP)的反应性能.在固定床微反装置上详细考察了工艺条件对纳米薄层HZSM-5分子筛催化性能的影响,同时与纳米HZSM-5分子筛对MTP反应的催化性能进行了比较.结果表明,纳米薄层HZSM-5分子筛具有较高的目的产物选择性和较长的催化寿命.在适宜硅铝比(n(SiO2)/n(Al2O3)=213)和反应条件下(温度470°C,甲醇质量空速为3 h-1),丙烯的选择性达到46.7%,三烯(乙烯、丙烯和C4烯烃)选择性达到78.7%.其中,丙烯/乙烯的质量比可达到6.5,是纳米HZSM-5分子筛的2倍,而芳烃的选择性比纳米分子筛明显降低.这是因为纳米薄层HZSM-5分子筛比纳米HZSM-5分子筛具有较宽的(010)晶面、较大的外比表面积和介孔孔容.     

泡沫铝负载钌基催化剂应用于N2O的低温催化分解研究

将导热性能良好的泡沫铝作为载体,羰基钌为前驱体制备了一系列不同形态的钌基催化剂应用于N2O的低温催化分解研究.采用XRD、XPS、SEM、TEM、BET、H2-TPR等方法对催化剂进行了表征,于石英管固定床反应器上对催化剂性能进行了评价.重点考察了泡沫铝作为催化剂载体的可行性、载体的处理方法对催化剂活性的影响以及RuO2、Ru、Ru3(CO)12所表现出的活性差异.结果表明:泡沫铝作为催化剂载体,能够促进N2O的催化分解;泡沫铝经H2O2处理有利于提高其对活性中心的附着力,提高催化活性;N2O浓度为1%,Ru负载量为0.3%,活性中心分别为Ru3(CO)12、Ru、RuO2时,N2O完全转化温度依次为285、380和415℃;活性较高的Ru3(CO)12/泡沫铝催化剂在长时间作用后活性组分转变为RuO2.     

系列含4,5-二氮杂-9,9′-螺二芴配体的钌配合物的合成及其性能研究(英文)

合成了3个钌髤配合物,[Ru(bpy)2(SB)](PF6)2、[Ru(bpy)(SB)2](PF6)2和[Ru(SB)3](PF6)2(bpy=2,2′-bipyridine,SB=4,5-diaza-9,9′-spirobifluorene),通过核磁和元素分析对配合物的结构进行了确定。[Ru(bpy)2(SB)](PF6)2通过X射线单晶衍射确认了结构。研究了配合物的光物理性能。结果表明[Ru(bpy)2(SB)](PF6)2在乙腈中的发桔红光,波长为606 nm,量子产率约为0.001 2。在同样条件下[Ru(bpy)(SB)2](PF6)2和[Ru(SB)3](PF6)2的发光非常微弱甚至几乎没有发光。还研究了这些配合物的电致化学发光性能。随着配体中SB含量的增加,发光的峰电压从1.36 V增加到1.58 V,相对发光强度从731降低到52。     

Electrochemical sensor based on f-SWCNT and carboxylic group functionalized PEDOT for the sensitive determination of bisphenol A

A simple,sensitive,and reliable method for the voltammetric determination of bisphenol A(BPA) by using carboxylic group functionalized single-walled carbon nanotubes(f-SWCNT)/carboxylic-functionalized poly(3,4-ethylenedioxythiophene)(PC4) complex modified glassy carbon electrode(GCE) has been successfully developed.The electrochemical behavior of BPA at the surface of the modified electrode is investigated by electrochemical techniques.The cyclic voltammetry results show that the as-prepared electrode exhibits strong catalytic activity toward the oxidation of BPA with a well-defined anodic peak at 0.623 V in PBS(0.1 mol/L,pH 7.0).The surface morphology of the 3D network of composite film is beneficial for the adsorption of analytes.Under the optimized conditions,the oxidation peak current is proportional to BPA concentration in the range between 0.099 and 5.794 μmol/L(R~2 = 0.9989),with a limit of detection of 0.032 μmol/L(S/N = 3).The enhanced performance of the sensor can be attributed to the excellent electrocatalytic property of/-SWCNT and the extraordinary conductivity of PC4.Furthermore,the proposed modified electrode displays high stability and good reproducibility.The good result on the voltammetric determination of BPA also indicates that the asfabricated modified electrode will be a good candidate for the electrochemical determination and analysis of BPA.     

Rapid Isolation of a Facultative Anaerobic Electrochemically Active Bacterium Capable of Oxidizing Acetate for Electrogenesis and Azo Dyes Reduction

In this study, 27 strains of electrochemically active bacteria (EAB) were rapidly isolated and their capabilities of extracellular electron transfer were identified using a photometric method based on WO₃ nanoclusters. These strains caused color change of WO₃ from white to blue in a 24-well agar plate within 40 h. Most of the isolated EAB strains belonged to the genera of Aeromonas and Shewanella. One isolate, Pantoea agglomerans S5-44, was identified as an EAB that can utilize acetate as the carbon source to produce electricity and reduce azo dyes under anaerobic conditions. The results confirmed the capability of P. agglomerans S5-44 for extracellular electron transfer. The isolation of this acetate-utilizing, facultative EBA reveals the metabolic diversity of environmental bacteria. Such strains have great potential for environmental applications, especially at interfaces of aerobic and anaerobic environments, where acetate is the main available carbon source.